Eaton Moeller SmartWire-Darwin Series, Аппаратное обеспечение и инженерия

Страница: 25 / 132

Engineering
21
06/09 AWB2723-1613en
Engineering The SmartWire-Darwin input/output modules are used for
the connection of other sensor and actuator devices without
integrated SmartWire-Darwin technology. The modules are
placed in the immediate vicinity of the sensors or actuators,
which markedly reduces the remaining wiring. Three
different modules are available.
EU5E-SWD-8DX
• eight digital inputs 24 V DC
EU5E-SWD-4D4D
• four digital inputs 24 V DC
• four digital outputs 24 V DC, 0.5 A
EU5E-SWD-4D2R
• four digital inputs 24 V DC
• two digital relay outputs 3 A
Via the two relay outputs Q0 and Q1 contactors can be
activated with greater pull-in power, for example.
h
The I/O modules draw their energy for communication
electronics, activation of the LEDs and of the I/O modules
from the SmartWire-Darwin network supply. Please take
into consideration the total current consumption of your
SmartWire-Darwin network and, if necessary, plan for an
additional feeder module EU5C-SWD-PF2-1.
h For data for the current requirement please refer to the
table in the appendix on page 105.