5
09/10 MN05013011Z-EN
1
About the Display/Operator
System
Components of the
display/operator system
The display/operator system described here consists of the
MFD-CP4 power supply/communication module, the
MFD-80.. display/operator unit and the MFD-CP4-...-CAB
connecting cable.
The following tables shows the individual components of the
display/operator system with their type designations.
Table 1:
Components of the display/operator system with type
designation
Proper use
The display/operator system must only be run if it is properly
mounted and installed:
• The installation must comply with regulations for electro-
magnetic compatibility (EMC).
• MFD-CP4 is designed to be installed in an enclosure,
switch cabinet or distribution board.
• If the display/operator system is switched on, the
controlled devices should not respond in an uncontrolled
manner, e.g. uncontrolled motor startups.
• To display graphics use the CP4 together with the
MFD-..-CP8-…/CP10…
Display/oper-
ator unit
Power supply
unit/communica-
tion module
Connecting cable
Connected device
MFD-80
MFD-80-B
MFD-..-CP4-500
MFD-CP4-500-CAB5
easy500, easy700
MFD-..-CP4-800
MFD-CP4-800-CAB5
easy800, easySafety,
MFD-..CP8-…/CP10…
