Device application
12
09/10 MN05013011Z-EN
Graphic mode on the
remotely operated MFD
If you connect a display/operator system with an MFD
(MFD-80-B with MFD…CP8/CP10) in graphic mode, the
following display is shown on the display/operator system:
You can terminate graphic mode from the display/operator
system by pressing ALT + ESC. The same thing can be
achieved by pressing the “*” button on the remotely oper-
ated MFD device as long another function was not assigned
to this button (
section “Special function”, page 36).
The remote device
is in
Graphic mode
