Page
5
e. Assign the remote (press any
button).
f. Assign a radio Hold Up Alarm
(HUA) Press both orange
buttons. Press
if there is no
HUA.
5. To assign a remote to the master
user, select
Edit User, then:
a. Select
User 001.
b. Select
Remote.
c. Press any button on the remote.
Step 8: Configure or disable
communications
You need to do one of the following:
•
If you are connecting the control
unit to an Alarms Receiving Centre
(ARC), configure communications
as described in the
Engineering
Guide.
•
If you are not using an ARC,
disable communications as
follows. (If you do not do this,
the navigation key will remain
permanently red to indicate an
alert state.)
From the top level of the Installer
menu:
a. Select
Communications.
b. Select
ARC Reporting.
c. Select
Call Mode.
d. Select
Disabled.
e. If you select
Call Mode again,
you will see a * before
Disabled
to indicate that this is the
selected option.
Basic configuration of the control unit
is now complete. Please refer to the
Engineering Guide or Admin & User
Manual (which can be downloaded
from www.touchpoint-online.co.uk) if
you need further information.
Step 9: Configure
SecureConnect™
SecureConnect allows users to set
or unset the alarm system, switch
outputs on or off and perform other
functions from a mobile device. If
users require this feature, please
configure SecureConnect as described
in the SecureConnect Installer Guide
(which can be downloaded from www.
touchpoint-online.co.uk).
