manualshive.com logo in svg

Eaton gree motion xChargeIn DC 22, Руководство по установке

Поделиться
Скачать
Eaton gree motion xChargeIn DC 22 Скачать руководство пользователя страница 14

10

 XCHARGEIN DC 22 INSTALLATION MANUAL

   MN192004EN   September 2021   www.eaton.com

00 Title

4.  Relevant information prior to the installation

4.1  Tools required for the installation

Installation, commissioning, maintenance or retrofitting of the charging station must be performed by 

qualified and authorized electricians who are responsible for complying with existing standards and local 

installation regulations.

The installation must be carried out only by professional installers.

During the installation, ensure the equipment is powered off.

4.2  Checking the box contents

To perform the installation, the installer should have the following tools:

The xChargeIn DC 22 box must contain the following parts:

 

•

Screwdriver

 

•

Open-ended wrenches

 

•

Drilling machine

 

•

Laptop

 

•

SIM card, in case of online chargers with 4G modem.

 

•

xChargeIn DC 22 charging station,

 

•

Quick start guide,

 

•

Safety guidelines,

 

•

EV plug(s), depending on customer configuration:

 

•

CCS plug and cable,

 

•

CCS and CHAdeMO plugs and cables,

 

•

The plug socket(s) for cable(s),

 

•

Screws and cable glands,

 

•

Cable gland cap (optional). 

Содержание gree motion xChargeIn DC 22















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды