![background image](http://html1.mh-extra.com/html/eaton/esr5-bws-31-24vdc/esr5-bws-31-24vdc_manual_4352057033.webp)
ATTENTION
4 Maintenance
ESR5-BWS-31-24VDC
11/23 MN049020EN Eaton.com
30
4.2 Storage and transport
The device is delivered in cardboard packaging.
•
Observe the handling instructions on and in the packaging.
•
For transportation and storage, observe the specifications regarding cli-
matic ambient conditions in the technical data for the temperature range,
humidity, and air pressure
4.2.1 Decommissioning and disposal
For decommissioning, make sure to observe the requirements of the
machine or system manufacturer.
When decommissioning the system or parts of the system, make sure to
handle the used devices as follows.
If you will continue to use the device in conformity with its intended
use:
•
Store and transport the device in conformity with the corresponding
specifications
Section 4.2, "Storage and transport", page30
The device is no longer used:
▶
Dispose of recyclables as required by your local recycling regulations.
4.2.2 Device replacement and repair
The device can be replaced if necessary.
If replacing the device:
•
Use the same device type
•
Use the same or a higher hardware/firmware version.
→
Transport the device exclusively in its original packaging or in
packaging suitable for transportation.
Devices no longer being used must be professionally disposed
or returned to the manufacturer or relevant sales department.
For more information, see
Eaton.com/recycling
.
CAUTION
DESTRUCTION
Repairs to the device, especially those involving opening the
housing, must be carried out exclusively by the manufacturer.