Enterprise Power Solutions Installation and Operation Guide
52
Copyright © 2008 Eaton Corporation. All Rights Reserved.
IPN 997-00012-56C September 2008
Step 6 - Adjust battery capacity in configuration file (if required)
•
In the SC200 or SC100 configuration file, set the battery capacity according to
the number of battery modules connected:
•
Either:
On SC100 go to:
Menu > Configuration > System > Edit > Battery Capacity
>Edit
, or
On SC200 go to:
Battery > Battery > Battery Capacity
.
•
Set
Battery Capacity
to the number of battery modules x 18Ah.
Procedure complete
Installing a Battery Module
Step 1 - Fit rack rails or battery shelves (if required)
The weight of the battery modules must be fully supported by either fixed
side rails or battery shelves.
If not already fitted, fit fixed rails or shelves (starting at the bottom of the
rack) to suit the number of battery modules.
Refer to Spare Parts on page
for available fixed rails.
Step 2 - Fit the mounting brackets to the front of each battery module
"
Rack mounting bracket (two per module)
#
Mounting handle (two per module)
