25
Operation
Force Hold / Force Neutral Operation
Force Neutral and Hold Neutral operation allow the driver the use of a separate
vehicle switch circuit to place and hold the transmission system in a neutral
state while a vehicle specific vehicle operation is performed.
Note:
The Force Neutral and Hold Neutral features are configured in the Trans-
mission Control Module (TCM) at the OEM or body builder. The configuration
can be changed using ServiceRanger.
To activate Force Neutral:
1. Ensure the vehicle is at a complete stop.
2. Select Neutral (N) mode using the transmission driver interface device.
3. Switch Force Neutral switch to On.
To deactivate Force Neutral:
1. Ensure the vehicle is at a complete stop.
2. Switch Force Neutral switch to Off.
To activate Hold Neutral:
1. Ensure the vehicle is at a complete stop.
2. Select Neutral (N) mode using the transmission driver interface device.
3. Proceed with Hold Neutral activation by means of integrated vehicle
switch circuit.
Note:
If the transmission system is in a non-Neutral shift mode and Hold
Neutral is activated, the transmission system remains in the currently
selected mode.
To deactivate Hold Neutral:
1. Ensure the vehicle is at a complete stop.
2. Discontinue Hold Neutral activation by means of integrated vehicle
switch circuit.
