![background image](http://html1.mh-extra.com/html/eaton/ems-2/ems-2_manual_4041118033.webp)
4 Short-circuit / motor protection
4.2 Motor protection
EMS2… Electronic motor starter
10/19 MN034003EN
www.eaton.com
29
4.2.3 Conditions when setting the motor protection
Ensure that the following conditions are met when setting the motor protec-
tion or when displaying the set value:
•
The device is supplied with voltage.
•
There are no errors.
•
There is no start signal on the terminals ON, L or R.
4.2.4 Setting of the motor protection
Activating parameterization mode
▶
Press the RESET button for at least 6 seconds.
→
The green
PWR
LED flashes once.
Setting the motor rated current
▶
Turn the potentiometer to the desired value.
Checking the value on the LEDs
▶
Compare the set value with that which is displayed on the
LEDs (
Leaving parameterization mode
▶
Press the RESET button.
Press 6 sec
I
e
or QR code
Press > 1 sec