11
System function introduction
E02A INTEGRATED RACK TYPE AIR CONDITIONER
UM.ICUBE2.0-IRTAC.SG.0822 August 2022 www.eaton.com
ENTERe:
ENTER button, which is used to confirm the entry.
ESCe:
Quit button, which is used to return to the previous page menu.
If there is no keyboard operation for consecutively 60s under any interface after start-up, it will automatically
return to the normal display interface. When any button is pressed after the system is powered up, the backlight
will turn on. If there is no keyboard operation for consecutively 60s, the backlight will be off.
The factory default operation password of the unit is “0001”. To change it, you need to press ENTER on the normal
display interface to enter the password input interface, press the LEFT button or RIGHT button to select the bits
for change, and press the UP/DOWN button to change the relevant digits, and finally press ENTER button to
confirm the change. If the password is incorrect, the interface will display the error message, and the unit setting
cannot be changed. If the password is correct, you can enter the main menu and edit the unit setting.
Remarks:
InT: Internal return temperature sensor
Tp: Evaporator coil temperature sensor
Te: Compressor exhaust pipe temperature sensor
Cond: Condenser coil temperature sensor
Unit menu structure
otee:
N
This diagram is unit menu structure, not the real factory setting.