Eaton DX RT 6K UPS, Руководство пользователя

Страница: 28 / 56

21
Warning There are some
abnormal problems
during the operation
of UPS. Normally the
problems are not fatal The UPS continues working, but please
pay attention to the warning, or the UPS
may fail.
Fault Some fatal problems
happened The UPS will cut off the output or transfer to
bypass mode at once, and keep alarming.
Overload The load exceeds the
capacity of the UPS Some unnecessary loads should be cut off
one by one to reduce the load connected to
the UPS.
No Battery UPS battery is not
connected, please
check the line Once the mains are loss or abnormal , The
UPS will shut down abnormally and the
output device will lose its protection.
5.3 Display functions
Use the two middle buttons ( and ) to scroll through the menu structure.
Press the Enter ( ) button to select an option. Press the ESC button to cancel or
return to the previous menu.
When starting the UPS, the display is in the default UPS status summary screen.
Main menu Submenu Display information or Menu function
UPS status [status summary screen] / [Alarm] / [Battery
charging/Volt/level/remaining time] / [mode/ Para
Num. /Running time]
Measurements [Load] W VA/ [Output/Current] A % /
[Output/Voltage] V Hz/ [Input/Voltage] V Hz /
[Battery] V % / [DC bus] V V /
[temperature] °C
[Battery remaining time]Min
Control Single UPS battery test Starts a manual battery test for single UPS
Parallel UPS battery
test
Starts a manual battery test for parallel UPS
Single UPS turn off Turn off one UPS in parallel UPS system