Eaton DV2-A10B, Инструкция по установке и эксплуатации

Страница: 70 / 95

Data-Voice-Video 3G Power Solutions (UL-Listed Models)
64
Copyright © 2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-82B May 2011
Purchasing Information
Eaton See contact details on page 85 .
Heinemann, Bussman
Your local electrical trade supplier or see contact details on
page
85 .
RadioShack
www.radioshack.com
Jaycar www.jaycar.com
Standard Torque Settings
Use the following torque settings unless specific values are stated on the fastener or elsewhere.
For battery terminals use the torque values specified by the battery manufacturer.
Thread Size
ISO Coarse
Minimum - Maximum Torque
M2.5 0.3 - 0.4Nm (2.7 - 3.5 inch-pounds)
M3 0.5 - 0.6Nm (4.5 - 5.3 inch-pounds)
M4 1.1 - 1.3Nm (9.8 - 11.5 inch-pounds)
M5 2.3 - 2.7Nm (20.5 - 23.9 inch-pounds)
M6 3.9 - 4.5Nm (35 - 39 inch-pounds)
M8 9.5 - 11.1Nm (85 - 98 inch-pounds)
M10 18.7 - 21.9Nm (166 - 194 inch-pounds)
M12 32.8 - 38.4Nm (292 - 340 inch-pounds)
M16 81.5 - 95.1Nm (724 - 844 inch-pounds)
Notes:
1
Torque settings are for mild steel, brass and stainless steel.
2
Torque is based on 60% of yield stress of the material. Yield for the purposes of this chart is
240MPa.
3
Tolerance range is 60 - 70 % of yield.
4
When a bolt and nut is torqued use a spanner to prevent rotation.