Data-Voice-Video 3G Power Solutions (UL-Listed Models)
14
Copyright © 2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-82B May 2011
Preparation
Before installation ensure that:
The floor surface where the equipment is to be installed is level.
The floor surface where the equipment is to be installed, and any areas over which the
equipment must be moved, are sufficiently strong to take the weight of the cabinets and the
point loading of the transport mechanism.
The mass of cabinets is given in Dimensions.
All areas of floor are protected from damage by the transport of the equipment. Use
hardboard or a similar material. This material must be removed once installation is
complete.
The installation area is clean and dry.
Positioning
In locating the equipment, the following must be considered:
Allow for working space in front of the system and for opening the security door
(minimum 24"/610mm).
Allow for working space behind the system (minimum 24"/600mm).
Allow space at one end for access to the space behind the system.
Allow distances from other equipment as required by the installation requirements of that
equipment.
When installing on a raised "computer floor", locate the first cabinet over one tile. If load
spreading is required due to cabinet weight then this must be installed prior to cabinets
being installed.
Fixing Cabinets
Mounting
The Data-Voice-Video 3G Power Solutions cabinets are mounted directly to the floor. The
method of fixing must be suitable for the cabinet size and weight, and for the surface to which
the cabinet is being secured.
Recommended procedure:
1
Place cabinet in position and align to other cabinets.
2
Mark fixing holes in base of cabinet with permanent marker.
3
Remove cabinet.
4
Drill all marked holes. De-burr all holes.
5
Place cabinets back in position.
6
Fix cabinet using appropriate floor anchors to secure the cabinets.
