![background image](http://html1.mh-extra.com/html/eaton/durant-eclipse-5775x-40-series/durant-eclipse-5775x-40-series_installation-and-operation-manual_3810959026.webp)
26
PROGRAMMING cont.
Programming Parameters
The programming columns are listed below, column by column. Each block name,
the parameter that it represents, the default value, and the range of values is listed
in the order in which the blocks appear when scrolling up through the column. There
may be some blocks that will cause the installer to wonder “should I do anything with
this, or not?” A comments section follows each column breakdown. These sections
attempt to provide some practical information that the installer may find helpful in
making programming choices.
Column F - Factors
Block
Parameter
Range (default Value is Bold)
F1
Count Factor
0
CF1/CF2 select by front panel
Select
1
Count Factor 1 only
2
Count Factor 2 only
3
CF1/CF2 select by inhibit input
F2
Count Factor 1 0.001-99999
1.0000
F3
Count Factor 2 0.001-99999
2.0000
F4
Count Display
0
XXXXXX
Decimal point
1
XXXXX
.
X
2
XXXX
.
XX
3
XXX
.
XXX
4
XX
.
XXXX
F5
Rate Display
0
XXXXXX
Decimal point
1
XXXXX
.
X
2
XXXX
.
XX
3
XXX
.
XXX
4
XX
.
XXXX
F6
Rate Time Unit
1-99999
# of Seconds
60
F7
Rate Smoothing
1-9
Factor
F8
Rate Zero Time
1-9