Eaton Cutler Hammer PowerXL DC1 E1 Series, Руководство по параметрам

Страница: 11 / 50

2 HMI device
2.1 Control unit elements
DC1…E1 Variable Frequency Drives 11/16 MN040022EN www.eaton.com
7
2 HMI device
2.1 Control unit elements
The following figure shows the elements of the DC1 variable frequency drive
integrated operating unit.
Figure 1: Operating unit view
Table 2: Keypad elements – Buttons
View
Push buttons
Button Attribute ID Explanation
OK • Opens and closes the parameter interface
• Saves parameter values
START • Starts the variable frequency drive
1)
• Changes the operating direction
2)
STOP • Stops the variable frequency drive
1)
• Reset – Resetting after an error message
UP • Increases the speed
1)
• Increases the parameter value
DOWN • Decreases the speed
1)
• Decreases the parameter value
Hint:
1) Only if P-12 = 1 (one operating direction) or = 2 (two operating directions)
2) Only if P-12 = 2