Chapter 1: Introduction
7
Downloading Drivers to a PanelMate Unit
•
In the VCP Transfer Utility, choose the “Executive” tab and select the proper Executive Firmware
to download to the PanelMate unit.
•
Click the button labeled “Add to Operation List.”
Note:
In order to download to a PanelMate for the first time or to clear the existence of another
driver, the PanelMate must first be loaded with Executive Firmware.
•
Choose the “Driver” tab.
•
Select the appropriate driver to be downloaded to the PanelMate.
•
Click the button labeled “Add to Operation List.”
•
Place the PanelMate unit in Serial Transfer Mode.
•
Connect a serial transfer cable from the correct port on the PC to port 1 on the PanelMate. (See
cabling below.)
•
Click “Start” at the bottom of the VCP Transfer Utility window.
•
Note:
For a more detailed description of downloading procedures and troubleshooting see
PanelMate Power Series, PowerPro, Pro LT Transfer Utility User’s Guide.
Serial Transfer Cables
Cable P/N 0518
