Preface
Information in this manual is subject to change without notice and does not represent a
commitment on the part of Eaton’s Cutler-Hammer, Inc. Permission is granted to duplicate
this material without modification only for your use or the internal use of other members of
your company or your agents to assist you in the use and servicing of products purchased
from Eaton’s Cutler-Hammer. No permission is granted to modify this material or include this
material in a compilation.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
paragraph (b)(3)(B) of the Rights in Technical Data and Computer Software clause of DAR
7-104.9(a). Contractor/Manufacturer is Eaton Corporation’s Cutler-Hammer Business Unit,
811 Green Crest Drive, Columbus, OH 43081.
TRADEMARKS
PanelMate is a federally registered trademark of Eaton Corporation. MS-DOS, Microsoft, and
Windows are federally registered trademarks of Microsoft Corporation. Data Highway and
Data Highway Plus are trademarks of Allen-Bradley. DeviceNet is a trademark of Open
DeviceNet Vendor Association. Iomega is a federally registered trademark of Iomega
Corporation.
Commercial brand names (trademarks) of products of manufacturers or developers, other than
Eaton Corporation or its affiliates, that appear in this manual may be registered or
unregistered trademarks of those respective manufacturers or developers, which have
expressed neither approval nor disapproval of Cutler-Hammer
products and services.
2002 Eaton Corporation. All rights reserved.
Printed in the United States of America.
P/N 01-00454-03
