Eaton Cutler-Hammer CHGENLC100ATS1SE Скачать руководство пользователя

Страница: 44 / 44

Instructional Booklet

Page

Effective: August 2007

Printed in USA

Publication No. IB00405002E / TBG00158

August 2007

O & M Manual for the CHGENLC Automatic

Transfer Switch with ATC-100 Control

This instruction booklet is published solely for information pur-

poses and should not be considered all-inclusive. If further infor-

mation is required, you should consult an authorized Eaton sales

representative.

The sale of the product shown in this literature is subject to the

terms and conditions outlined in appropriate Eaton selling policies

or other contractual agreement between the parties. This litera-

ture is not intended to and does not enlarge or add to any such

contract. The sole source governing the rights and remedies of

any purchaser of this equipment is the contract between the pur-

chaser and Eaton.

NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WAR-

RANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MER-

CHANTABILITY, OR WARRANTIES ARISING FROM COURSE OF

DEALING OR USAGE OF TRADE, ARE MADE REGARDING THE

INFORMATION, RECOMMENDATIONS, AND DESCRIPTIONS

CONTAINED HEREIN. In no event will Eaton be responsible to the

purchaser or user in contract, in tort (including negligence), strict

liability or otherwise for any special, indirect, incidental or conse-

quential damage or loss whatsoever, including but not limited to

damage or loss of use of equipment, plant or power system, cost

of capital, loss of power, additional expenses in the use of exist-

ing power facilities, or claims against the purchaser or user by its

customers resulting from the use of the information, recommen-

dations and description contained herein.

Eaton Corporation

Electrical Group

1000 Cherrington Parkway

Moon Township, PA 15108

United States

877-ETN CARE (877-386-2273)

Eaton.com

Содержание Cutler-Hammer CHGENLC100ATS1SE













































Результаты поиска

Содержание Cutler-Hammer CHGENLC100ATS1SE

Отзывы:

Похожие инструкции для Cutler-Hammer CHGENLC100ATS1SE

Бренды по названию

Популярные бренды

Eaton Cutler-Hammer CHGENLC100ATS1SE, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Cutler-Hammer CHGENLC100ATS1SE

Отзывы:

Похожие инструкции для Cutler-Hammer CHGENLC100ATS1SE

Бренды по названию

Популярные бренды