C. M2-CEILING-SWIVEL-KIT
1. Asegúrese de que la alimentación esté desconectada del sistema de
conductos antes de instalar la luminaria.
2. Identifique la ubicación de montaje adecuada para instalar la luminaria,
marque y perfore los orificios para fijar los soportes giratorios de acuerdo con
la dimensión de centro a centro "A" en la tabla a continuación (ver Figura 3).
3. Monte los conjuntos de soporte giratorio en la cubierta del controlador de
la luminaria, como se muestra en la Figura 3. Utilice dos (2) de los pernos
hexagonales de 1/4" proporcionados y arandelas de seguridad con anillo
dividido para cada soporte. Aplique un torque de 64 in-lb (7,2 N-m).
4. La luminaria ahora está lista para el montaje. Se recomienda
encarecidamente que use a dos (2) personas especializadas calificadas
para proceder con el montaje final de la luminaria. Se recomienda esto
para evitar cualquier lesión personal o daño a la luminaria.
5. Instale y apriete los sujetadores de 1/4" de diámetro (suministrados por el
cliente) en cada uno de los orificios de montaje del soporte. Se recomienda
utilizar accesorios de acero inoxidable en lugares con problemas de corrosión.
6. Ajuste la posición de la luminaria al ángulo deseado, ajuste los dos (2)
pernos de pivote de 5/16" firmemente al soporte y, luego, apriete las
tuercas hexagonales. Aplique un torque de 120 in-lb (13,6 N-m).
IF 1946 • 09/22
Copyright © 2022, División Crouse-Hinds de Eaton
Página 10
Longitud
2 pies
(in)
2 pies
(mm)
4 pies
(in)
4 pies
(mm)
A
26,4
670
26,4
670
B
24,0
610
39,0
991
Figura 3. Instalación del montaje giratorio en techo
THIRD ANGLE PROJECTION
166.9
6.57
175.3
6.90
A
B
B
669.3
26.35
1/4" SPLIT LOCK WASHER
1/4-20 x 1/2" CAP SCREW
CCHSY-SW-Template-D
SW_REV 11/2015
DO NOT SCALE DRAWING
NOTES:
1.
A
B
C
D
1
2
3
4
5
6
7
8
A
D
C
B
8
7
6
5
4
3
2
1
Your name
ASSY2
CAT2
CAT1
ASSY1
ARE IN
MILLIMETERS.
DIMENSIONS IN [ ] ARE IN
ALL PRIMARY DIMENSIONS
UNLESS OTHERWISE SPECIFIED,
MM/DD/YYYY
Your Name
WITH ASME Y14.5 2009.
DIM AND TOL IN ACCORDANCE
±
±
±
±
.1
.3
INCHES.
rev
0000000
WT. 15.84 LB
SCALE 1:2
FIRST MADE FOR Catalog Family
Title Line 1
APPROVED BY
DRAWN BY
Finish
... THICK
Material
mm
in.
.13
.000
1.5
Your Name
THIS IS PROPERTY OF EATON AND CONTAINS CONFIDENTIAL AND
TRADE SECRET INFORMATION. POSSESSION DOES NOT CONVEY
ANY RIGHTS TO LOAN, SELL OR DISCLOSE SAID INFORMATION.
REPRODUCTION OR USE FOR ANY PURPOSE OTHER THAN WHICH
IT WAS SUPPLIED MAY NOT BE MADE WITHOUT EXPRESS
WRITTEN PERMISSION OF EATON. THIS DRAWING IS ON LOAN
AND IS TO BE RETURNED UPON REQUEST.
Title Line 2
Your Name
MM/DD/YYYY
1.5
±
.005
±
.01
±
±
ANGLES
.XXX
.XX
.X
REDRAWN DATE
ORIGINAL DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES
MATERIAL:
FINISH:
APPROVED BY
CHECKED BY
USED ON
APPLICATION
NEXT ASSY.
TITLE
CODE IDENT. NO.
SIZE
REV.
D
SHEET 3 OF 5
CODE ...
THIRD ANGLE PROJECTION
166.9
6.57
175.3
6.90
A
B
B
669.3
26.35
1/4" SPLIT LOCK WASHER
1/4-20 x 1/2" CAP SCREW
CCHSY-SW-Template-D
SW_REV 11/2015
DO NOT SCALE DRAWING
NOTES:
1.
A
B
C
D
1
2
3
4
5
6
7
8
A
D
C
B
8
7
6
5
4
3
2
1
Your name
ASSY2
CAT2
CAT1
ASSY1
ARE IN
MILLIMETERS.
DIMENSIONS IN [ ] ARE IN
ALL PRIMARY DIMENSIONS
UNLESS OTHERWISE SPECIFIED,
MM/DD/YYYY
Your Name
WITH ASME Y14.5 2009.
DIM AND TOL IN ACCORDANCE
±
±
±
±
.1
.3
INCHES.
rev
0000000
WT. 15.84 LB
SCALE 1:2
FIRST MADE FOR Catalog Family
Title Line 1
APPROVED BY
DRAWN BY
Finish
... THICK
Material
mm
in.
.13
.000
1.5
Your Name
THIS IS PROPERTY OF EATON AND CONTAINS CONFIDENTIAL AND
TRADE SECRET INFORMATION. POSSESSION DOES NOT CONVEY
ANY RIGHTS TO LOAN, SELL OR DISCLOSE SAID INFORMATION.
REPRODUCTION OR USE FOR ANY PURPOSE OTHER THAN WHICH
IT WAS SUPPLIED MAY NOT BE MADE WITHOUT EXPRESS
WRITTEN PERMISSION OF EATON. THIS DRAWING IS ON LOAN
AND IS TO BE RETURNED UPON REQUEST.
Title Line 2
Your Name
MM/DD/YYYY
1.5
±
.005
±
.01
±
±
ANGLES
.XXX
.XX
.X
REDRAWN DATE
ORIGINAL DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES
MATERIAL:
FINISH:
APPROVED BY
CHECKED BY
USED ON
APPLICATION
NEXT ASSY.
TITLE
CODE IDENT. NO.
SIZE
REV.
D
SHEET 3 OF 5
CODE ...
D. M2-PM-KIT-*
1. Asegúrese de que la alimentación esté desconectada del sistema de
conductos antes de instalar la luminaria.
2. Verifique que el diámetro interno de la abrazadera coincida con el diámetro del
poste antes de la instalación. Las abrazaderas están disponibles en tamaños de
1,65 (42 mm), 2,00 (51 mm) y 2,36 (60 mm) (consulte la Figura 5).
3. Los soportes de montaje en poste tienen una separación de 20,75" en las
líneas centrales del soporte, como se muestra en la Figura 4.
4. Apriete dos (2) de los pernos hexagonales de 1/4" proporcionados y
arandelas de seguridad con anillo dividido en cada subconjunto de
soporte. Aplique un torque de 64 in-lb (7,2 N-m).
5. Retire los dos (2) tornillos de 5/16", las arandelas de seguridad y las tuercas
de cada abrazadera y quite las mitades superiores de las abrazaderas.
6. La luminaria ahora está lista para el montaje. Se recomienda
encarecidamente que use a dos (2) personas especializadas calificadas
para proceder con el montaje final de la luminaria. Se recomienda esto
para evitar cualquier lesión personal o daño a la luminaria.
7. Levante la luminaria en posición de tal manera que el poste encaje en las
mitades inferiores de las abrazaderas.
8. Instale las dos (2) mitades superiores de las abrazaderas y los tornillos de
5/16", las arandelas de seguridad y las tuercas en cada abrazadera.
9. Ajuste uniformemente las tuercas en los tornillos de 5/16 in con una
secuencia hacia delante y hacia atrás. Aplique un torque de 120 in-lb
(13,6 N-m).
N.º Cat
Configuración
Dimensión (pulgadas)
A
B
C
D
M2-PM-KIT-1.25
Kit PM 2.0 (tamaño
comercial 2")
4,331
3,543
2,36
1,693
M2-PM-KIT-1.5
Kit PM 1.5 (tamaño
comercial 1 - 1/2")
3,740
2,953
2,00
1,535
M2-PM-KIT-2.0
Kit PM 1.25 (tamaño
comercial 1 - 1/14")
3,386
2,598
1,65
1,378
Longitud
2 pies
(in)
2 pies
(mm)
4 pies
(in)
4 pies
(mm)
A
24,0
610
39,0
991
B
Consulte la siguiente tabla para conocer los
diámetros de las abrazaderas de tubo.
Figura 4. Instalación de montaje en poste
Figura 5. Detalles del montaje en poste
THIRD ANGLE PROJECTION
A
527.1
20.75
A
171
6.7
B
175.3
6.90
198
7.8
A
C
D
B
CCHSY-SW-Template-D
SW_REV 11/2015
DO NOT SCALE DRAWING
NOTES:
1.
A
B
C
D
1
2
3
4
5
6
7
8
A
D
C
B
8
7
6
5
4
3
2
1
Your name
ASSY2
CAT2
CAT1
ASSY1
ARE IN
MILLIMETERS.
DIMENSIONS IN [ ] ARE IN
ALL PRIMARY DIMENSIONS
UNLESS OTHERWISE SPECIFIED,
MM/DD/YYYY
Your Name
WITH ASME Y14.5 2009.
DIM AND TOL IN ACCORDANCE
±
±
±
±
.1
.3
INCHES.
rev
0000000
WT. 15.84 LB
SCALE 1:2
FIRST MADE FOR Catalog Family
Title Line 1
APPROVED BY
DRAWN BY
Finish
... THICK
Material
mm
in.
.13
.000
1.5
Your Name
THIS IS PROPERTY OF EATON AND CONTAINS CONFIDENTIAL AND
TRADE SECRET INFORMATION. POSSESSION DOES NOT CONVEY
ANY RIGHTS TO LOAN, SELL OR DISCLOSE SAID INFORMATION.
REPRODUCTION OR USE FOR ANY PURPOSE OTHER THAN WHICH
IT WAS SUPPLIED MAY NOT BE MADE WITHOUT EXPRESS
WRITTEN PERMISSION OF EATON. THIS DRAWING IS ON LOAN
AND IS TO BE RETURNED UPON REQUEST.
Title Line 2
Your Name
MM/DD/YYYY
1.5
±
.005
±
.01
±
±
ANGLES
.XXX
.XX
.X
REDRAWN DATE
ORIGINAL DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES
MATERIAL:
FINISH:
APPROVED BY
CHECKED BY
USED ON
APPLICATION
NEXT ASSY.
TITLE
CODE IDENT. NO.
SIZE
REV.
D
SHEET 4 OF 5
CODE ...
THIRD ANGLE PROJECTION
A
527.1
20.75
A
171
6.7
B
175.3
6.90
198
7.8
A
C
D
B
CCHSY-SW-Template-D
SW_REV 11/2015
DO NOT SCALE DRAWING
NOTES:
1.
A
B
C
D
1
2
3
4
5
6
7
8
A
D
C
B
8
7
6
5
4
3
2
1
Your name
ASSY2
CAT2
CAT1
ASSY1
ARE IN
MILLIMETERS.
DIMENSIONS IN [ ] ARE IN
ALL PRIMARY DIMENSIONS
UNLESS OTHERWISE SPECIFIED,
MM/DD/YYYY
Your Name
WITH ASME Y14.5 2009.
DIM AND TOL IN ACCORDANCE
±
±
±
±
.1
.3
INCHES.
rev
0000000
WT. 15.84 LB
SCALE 1:2
FIRST MADE FOR Catalog Family
Title Line 1
APPROVED BY
DRAWN BY
Finish
... THICK
Material
mm
in.
.13
.000
1.5
Your Name
THIS IS PROPERTY OF EATON AND CONTAINS CONFIDENTIAL AND
TRADE SECRET INFORMATION. POSSESSION DOES NOT CONVEY
ANY RIGHTS TO LOAN, SELL OR DISCLOSE SAID INFORMATION.
REPRODUCTION OR USE FOR ANY PURPOSE OTHER THAN WHICH
IT WAS SUPPLIED MAY NOT BE MADE WITHOUT EXPRESS
WRITTEN PERMISSION OF EATON. THIS DRAWING IS ON LOAN
AND IS TO BE RETURNED UPON REQUEST.
Title Line 2
Your Name
MM/DD/YYYY
1.5
±
.005
±
.01
±
±
ANGLES
.XXX
.XX
.X
REDRAWN DATE
ORIGINAL DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES
MATERIAL:
FINISH:
APPROVED BY
CHECKED BY
USED ON
APPLICATION
NEXT ASSY.
TITLE
CODE IDENT. NO.
SIZE
REV.
D
SHEET 4 OF 5
CODE ...
THIRD ANGLE PROJECTION
A
527.1
20.75
A
171
6.7
B
175.3
6.90
198
7.8
A
C
D
B
CCHSY-SW-Template-D
SW_REV 11/2015
DO NOT SCALE DRAWING
NOTES:
1.
A
B
C
D
1
2
3
4
5
6
7
8
A
D
C
B
8
7
6
5
4
3
2
1
Your name
ASSY2
CAT2
CAT1
ASSY1
ARE IN
MILLIMETERS.
DIMENSIONS IN [ ] ARE IN
ALL PRIMARY DIMENSIONS
UNLESS OTHERWISE SPECIFIED,
MM/DD/YYYY
Your Name
WITH ASME Y14.5 2009.
DIM AND TOL IN ACCORDANCE
±
±
±
±
.1
.3
INCHES.
rev
0000000
WT. 15.84 LB
SCALE 1:2
FIRST MADE FOR Catalog Family
Title Line 1
APPROVED BY
DRAWN BY
Finish
... THICK
Material
mm
in.
.13
.000
1.5
Your Name
THIS IS PROPERTY OF EATON AND CONTAINS CONFIDENTIAL AND
TRADE SECRET INFORMATION. POSSESSION DOES NOT CONVEY
ANY RIGHTS TO LOAN, SELL OR DISCLOSE SAID INFORMATION.
REPRODUCTION OR USE FOR ANY PURPOSE OTHER THAN WHICH
IT WAS SUPPLIED MAY NOT BE MADE WITHOUT EXPRESS
WRITTEN PERMISSION OF EATON. THIS DRAWING IS ON LOAN
AND IS TO BE RETURNED UPON REQUEST.
Title Line 2
Your Name
MM/DD/YYYY
1.5
±
.005
±
.01
±
±
ANGLES
.XXX
.XX
.X
REDRAWN DATE
ORIGINAL DATE
UNLESS OTHERWISE SPECIFIED
TOLERANCES
MATERIAL:
FINISH:
APPROVED BY
CHECKED BY
USED ON
APPLICATION
NEXT ASSY.
TITLE
CODE IDENT. NO.
SIZE
REV.
D
SHEET 4 OF 5
CODE ...
!
ADVERTENCIA
Para evitar provocar lesiones al personal,
no deje la luminaria colgando
ni la flexione en un soporte a la vez. El incumplimiento de las normas
provocará la rotura del soporte y, posiblemente, lesiones o la muerte.
!
ADVERTENCIA
Para evitar provocar lesiones al personal,
no deje la luminaria colgando
ni la flexione en un soporte a la vez. El incumplimiento de las normas
provocará la rotura del soporte y, posiblemente, lesiones o la muerte.
TORNILLO DE CABEZA DE 1/4-20 x 1/2"
ARANDELA ABIERTA DE BLOQUEO DE 1/4 in
