14
Technical Data
PR202-50-502-22
Effective June 2017
CF2000 System
EATON
www.eaton.com
Spur Isolator
CSI350 Enables soft addressing to work when the loop contains
spurs, it controls the addressing operation so that when the
system reaches a spur, all devices on the spur are allocated
an address before it continues addressing the loop . CSI350 is
mounted on a standard deep double gang back box (supplied) .
The device also incorporates a short circuit isolator . Because each
device contains a short circuit isolator only 1 is required at the
start of each spur .
Please refer to BS5839 Pt1:2002 for details of the maximum
allowable area to be covered by a single spur / zone .
4 Way Sounder Circuit Controller
CSC354CPR provides power for 4 separately controllable conven-
tional sounder circuits, each circuit can be separately programmed .
It has been designed to greatly simplify installation in applications
where specialist sounders or beacons are required since it powers
the sounders and allows full control of the sounder operation
without having to wire the sounder back to the CF2000 control
panel . A 4 way unit takes up a single address but each circuit can
be independently controlled .
An CSC354CPR unit requires a local un-switched 230V supply and
incorporates a back up battery to 24 hours of standby operation
followed by a minimum of 30 minutes of full alarm ringing .
A standby of 72 hours can be achieved at the expense of reduced
load capability .
