Eaton C440/XTOE Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 40

background image

DeviceNet Configuration

16

C440/XTOE Electronic Overload Relay, DeviceNet

MN04210002E—March 2011 www.eaton.com

Status

This attribute represents the current status of the entire device. Its value changes as the state of
the device changes. The Status attribute is a WORD, with the following bit definitions:

Bit Definitions for Instance #1, Status Attribute of Identity Object (C440)

State

This attribute is an indication of the present state of the device. Note that the nature of a major
unrecoverable fault could be such that it may not be accurately reflected by the state attribute.

This attribute reflects the dynamic status of the adapter. The defined states are:

Defined States

Bit(s)

Called

Definition

0

Owned

—

1

—

Reserved, set to zero.

2

Configured

TRUE indicates that the application of the device has been configured to do
something different than the “out-of-box” default. This does not include
configuration of the communications.

3

—

Reserved, set to zero.

4 – 7

—

Reserved, set to zero.

8

Minor recoverable fault

TRUE indicates that the device detected a problem with itself, which is thought
to be recoverable. The problem does not cause the device to go into one of the
faulted states.

9

Minor unrecoverable
fault

TRUE indicates that the device detected a problem with itself, which is thought
to be unrecoverable. The problem does not cause the device to go into one of the
faulted states.

10

Major recoverable
fault

TRUE indicates that the device detected a problem with itself, which caused the
device to go into the “major recoverable fault” state.

11

Major unrecoverable
fault

TRUE indicates that the device detected a problem with itself, which caused the
device to go into the "major unrecoverable fault" state. See Behavior section.

12, 13

—

Reserved, set to zero.

14, 15

—

Reserved, set to zero.

Value

State Name

Description

0

Non-existent

This state will never be visible from within a device. This state is
principally intended for a tool to be able to represent the lack of an
instance in a physical device.

1

Device self testing

Power-up or reset operation. Will not be visible from within a device
because communications are not active in this state.

2

Standby

This state is reported while needs commissioning due to an incorrect
or incomplete configuration.

3

Operational

This state is reported when the adapter is powered up, configured
and operating normally.

4

Major recoverable fault

—

5

Major unrecoverable fault

—

C440 DeviceNet.book Page 16 Friday, March 25, 2011 10:41 AM

For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

«
...
22
23
24
25
26
...
»

Содержание C440/XTOE









































Отзывы:

Нет отзывов

Похожие инструкции для C440/XTOE

Бренд: Zy Страницы: 6

ENDA EPDA1 Series

Бренд: sisel Страницы: 2

Бренд: Multilin Страницы: 51

Бренд: Eaton Страницы: 187

UPLC CU44-VER04

Бренд: Ametek Страницы: 129

Бренд: Schweitzer Engineering Laboratories Страницы: 360

BTR NETCOM CPW-E12

Бренд: Metz Connect Страницы: 2

Бренд: Samlexpower Страницы: 2

Бренд: Proove Страницы: 2

Бренд: ABB Страницы: 26

Бренд: ABB Страницы: 28

Бренд: SCHALT Страницы: 2

Бренд: Sel Страницы: 6

Бренд: Sel Страницы: 8

MIRRORED BITS FGR-115MB

Бренд: Sel Страницы: 8

Бренд: Sel Страницы: 16

Бренд: Sel Страницы: 32

Бренд: Areva Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды