Eaton 34003991EN/EB страница 44 Скачать руководство пользователя

Страница: 44 / 118

Network Management Card

– User Manual

34003991EN/EB

Page

44/118

◗

Recipient List:

On the left side of this page, up to four recipients can be configured to receive e-mails from the card. Each

addressee has its own trigger events, selected from the right side of the page, for which an e-mail is sent. The

card’s log indicates e-mail transmission errors.

Each recipient is configured with the following parameters:

◗

Recipient: (Field is limited to 99 characters) this is the e-mail address of the person or department to

receive the e-mail.

The default value is

[email protected]

◗

Attached files: The files selected (Measurements, Event log, System log, Environment

measurements) are enclosed with each e-mail sent. The files are sent in CSV format

◗

Periodic report: In addition to the e-mails sent when events occur, a periodic e-mail containing the 3

log files can be sent to the recipient every x days at the time specified by the user.

To configure the first transmission, specify the day, time and frequency of the next transmission in

the "next report" box. After this date, the page will show the date and time of the next transmission.

Data are sent in CSV format.

◗

Save: Saves any modifications.

◗

Test enables an e-mail to be sent to the recipient immediately. This is one way of checking e-mail transmission,

particularly access to the SMTP server configured in "Network" settings. A transmission report is added to the

system log.

The event label in the subject and text of the message is replaced with a test label.

If the user makes any modifications to the page, they must be saved before using the "Test" function.

◗

Notified events:

◗

The right side of the page shows the events that can be notified.

By default, only the main events of battery operation and a few UPS alarms are accessible. All the events appear if

the Show/Hide Events option is actuated.

By default, two events are selected for notification. The user can modify this pre-selection by ticking other events

or can, on the contrary, restore the initial configuration by clicking Set Default.

◗

Email Message Settings: access to the message configuration page

◗

Network Settings: enables the name of the SMTP server to be entered.

See page

◗

Security: The administrator has to click on Save and enter his/her login/password to save any modifications. The

default

login and password are: admin/admin

Содержание 34003991EN/EB























































































































Результаты поиска

Содержание 34003991EN/EB

Отзывы:

Похожие инструкции для 34003991EN/EB

Бренды по названию

Популярные бренды

Eaton 34003991EN/EB, Руководство пользователя

Результаты поиска

Содержание 34003991EN/EB

Отзывы:

Похожие инструкции для 34003991EN/EB

Бренды по названию

Популярные бренды