Eaton 199740, Руководство пользователя

Страница: 72 / 91

7. Make Connection
7.1 easyE4 with the easy-RTD
If you tap and hold 3 seconds on the gray background around the
control buttons, a popup with the list of favorites will appear. You
can use this to quickly switch between various easyE4 devices
without having to go through the
Remote easyE4 menu every
time.
8. Set it as the default configuration or store it in the list of favorites
so that you will not have to run a search again when establishing this con-
nection.
/
Fig. 33: Remote easy-RTD
You can also enter the IP address directly in the input fields with the arrow buttons or
the input assistance. After doing this, tap the Connect button to establish the con-
nection.
7.1.2 easyE4 settings
If you are using an easyE4 with a display, the remote control per-
missions can be configured directly on the easyE4 itself and in
easySoft 7.
If you are using an easyE4 without a display, the remote control per-
missions can only be configured with easySoft 7.
New easyE4 base devices will come with the Auto IP setting configured by default. In
order to configure the settings differently on the EASY-E4-...-12...C1(P), use the menu
structure and go to
System Options\Ethernet
72
easy Remote Touch display 06/21 MN048027EN Eaton.com