5
Configuration guide
Eaton 1250W / 1500W / 1800W Inverter Operation and Installation Guide
IM SP180164 / Rev D www.eaton.com
3. To choose a new setting, stop at the desired value, press and hold the
SELECT
button for five seconds to memorize the
setting.
4. Confirm the new setting by not touching the inverter for approximately 5 seconds to return to inverter setting display
mode. Press
SELECT
button multiple times to confirm new setting(s).
To adjust battery type [ FI, FLo, gEL, Ag ] setting:
By default, the battery type is
FI, Fixed
.
To change the battery type setting:
1. Press and hold the
green power button
for approximately 2 seconds. The inverter will beep and the display will flash
the input voltage. Press the
SELECT
button until “FI” is displayed. Press and hold the
POWER
button for 5 seconds.
2. Press
SELECT
button to toggle between the four battery type settings:
•
“
FI
” – this indicates Fixed setting.
•
“
FLo
” – this indicates Flooded battery setting.
•
“
gEL
” – this indicates Gel battery setting.
•
“
Ag
” – this indicates AGM battery setting.
3. To choose a new setting, stop at the desired value, press and hold the
SELECT
button for five seconds to memorize the
setting.
4. Confirm the new setting by not touching the inverter for approximately 5 seconds to return to inverter setting display
mode. Press
SELECT
button multiple times to confirm new setting(s).
To reset factory default settings:
By default, the inverter settings are
max charge current
,
AL1
,
11.8
,
FI
To reset these values:
1. Press and hold the
green power button
for approximately 2 seconds. The inverter will beep and the display will flash
the input voltage. Press the
SELECT
button until “dEF” is displayed. Press and hold the
POWER
button for 5 seconds.
2. Press and hold the
SELECT
button for five seconds to memorize the setting.
3. Confirm the new setting by not touching the inverter for approximately 5 seconds to return to inverter setting display
mode. Press
SELECT
button multiple times to confirm new setting(s).
