Eaton Compressor POLAR AIR PP20H240V3 Скачать руководство пользователя

Страница: 5 / 42

Polar Air Electric Operated, Piston Compressors

CALIFORNIA PROPOSITION 65

This manual contains very important information to know and understand. This is provided for

SAFETY

and to

PREVENT EQUIPMENT PROBLEMS

To help understand this information, observe the following:

This product or its power cord may contain chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm. Wash
hands after handling.

Allow only trained, authorized persons who have read and understood these operating instructions to use

this compressor. Failure to follow the instructions, procedures and safety precautions in this manual can

result in accidents and injuries.

2. NEVER start or operate the compressor under unsafe conditions. Tag the compressor, disconnect and lock

out all power to it to prevent accidental start-up until the condition is corrected.

3. Install, use and operate the compressor only in full compliance with all pertinent OSHA regulations and all

applicable Federal, State & Local codes, standards and regulations.

4. NEVER modify the compressor and/or controls in any way.

5. Keep a first aid kit in a convenient place. Seek medical assistance promptly in case of injury. Avoid infection

by caring for any small cuts and burns promptly.

Danger indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.

Warning indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

Notice indicates important information, that if not followed, may
cause damage to equipment.

Read all manuals included with this product carefully. Be
thoroughly familiar with the controls and the proper use of the
equipment.

DANGER

WARNING

CAUTION

NOTICE

Safety Information

Basic Guidelines

Содержание POLAR AIR PP20H240V3











































Результаты поиска

Содержание POLAR AIR PP20H240V3

Отзывы:

Похожие инструкции для POLAR AIR PP20H240V3

Бренды по названию

Популярные бренды

Eaton Compressor POLAR AIR PP20H240V3, Руководство пользователя

Результаты поиска

Содержание POLAR AIR PP20H240V3

Отзывы:

Похожие инструкции для POLAR AIR PP20H240V3

Бренды по названию

Популярные бренды