manualshive.com logo in svg

Eaton Compressor POLAR AIR PP20H240V3, Руководство пользователя

Поделиться
Скачать
Eaton Compressor POLAR AIR PP20H240V3 Скачать руководство пользователя страница 36

APP3Y2062T-EC20T

Operation and Care

All units are shipped with break-In Oil. Oil should be changed within the first 50 hours or 30 days, 
whichever comes first. Use only Airbase Industries Piston Air Compressor oil. 

WARNING

 - under 

NO

 

circumstance should you use AUTOMOTIVE oil, in your air compressor, as this can cause damage to your 
compressor and void your warranty.

•  

Check the oil level before starting.

•  

Turn compressor over a few revolutions by hand to make sure that everything is free.

•  

Check the belt tension.

•  

Remove tools, rags, and any other objects from the vicinity of the compressor.

•  

Never put hands on the belt of idle units, unless the motor is switched off and locked out.

• 

Note the direction of the arrow on the flywheel and be sure that the direction of

 

rotation is correct when the machine is started. Correct direction is counter-clockwise when  

 

 

standing facing the flywheel. Air should be drawn through the intercooler onto the cylinders for   

 

maximum cooling.

Starting

Service

 

•    Oil should be changed every 90 days. Oil level should be at  

 

 

halfway level in sight lass. 

 

•   If oil is milky,

 it should be changed

  

•    Inspect air filters weekly and change as needed.

Tank feet should be place on vibration isolator pads available through your dealer. Anchor bolts should be 
gently snug, but not tight, to allow for vibration. Remember, the bolt is only a guide to hold the compressor 
in place. Do not over tighten the legs of the tank against the pads…it will damage your tank. 

Caution: 

Do 

not set tank on dirt. Over time, the tank will tilt causing the pump to fail from in adequate lubrication.

Tank

5

Содержание POLAR AIR PP20H240V3











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды