EasyWay 110, Руководство пользователя

Страница: 41 / 145

6. OPTION SETTINGS
6.1 Automatic closure
Automatic closure is started after the previously set interval time.
a) Press the CLOCK ICON. The
green LED on the right will
become lit.
-
If none of the LEDs between “ - ” and
“+” is lit, automatic closure is not active
– in order to activate it, it is necessary
to push the “+” button.
- If at least one “1” LED lights up,
automatic closure is activated – in order
to deactivate it, it is necessary to hold
the “ - ” button until all the LEDs go out .
The INTERVAL TIME can be set by pressing the “ - ”
and “+” buttons .
Wait for 20 seconds or press the CLOCK ICON
again in order to leave the programming mode.
Work cycle: OPEN - INTERVAL - CLOSE - INTERVAL
7. FORCE, SENSITIVITY, SPEED
7.1 Adjustment of force
Press the ADJUSTMENT ICON “1”, the red LED
on the left will become lit:
Press “ - ” or “+” to adjust force .
LEDs ON INTERVAL TIME
Automatic starting is not active
5 s
10 s
30 s
60 s
120 s
40