EasyWay 110, Руководство пользователя

Страница: 38 / 145

a) Hold the START button for 5 seconds First
LEDs will first become lit and then start
flashing.
b) Press the start button (Step-by-step) or
the remote control button in order to start
the configuration sequence.
If the gate starts opening, press one of the
buttons again to move it back (the first
movement of the gate needs to be in the
closing direction).
Default configuration: if the motoreducer is
installed on the left side, the closing
manoeuvre must be performed to the right.
CAUTION:
In order for the functioning to take place correctly, the first limit switch activated needs to be a
closure limit switch.
When the gate is closed, it is
necessary to press the “step -by- step”
button or the remote control button
in order to perform the first opening
maneuver.
During the opening maneuver, it is
necessary to press the “step -by- step”
button or the remote control button
in order to adjust the release starting
point during the opening phase. We
recommend not less than 80 cm.
37