EASYSTEAM ANAPA Скачать руководство пользователя

Страница: 32 / 36

GUARANTEE OBLIGATIONS

Warranty goes into e ect as from the moment of furnace sale and provided only in the

presence of the product certiﬁcate.

In case if there is no sale date in the certiﬁcate, the warranty period starts from the date of production

but not more than 3 years.

Manufacturer provides furnace walls burn-out guarantee for 3 years:

This warranty doesn't cover detachable parts, furnace parts (chamotte tiles, boiler grate, glass,

cords), paint-and-lacquer coating as well as damages in the course of incorrect installation or

exploitation. If chamotte tile breaks inside the burner it will not a ect the operation of the furnace and

consequently this is not a warranty case.

When the product is used in violation of rules which are set forth in this document, the manufac-

turer disclaims all warranty liabilities.

Manufacturer disclaims all warranty liabilities upon any of the following:

Inappropriate use of the furnace

Commercial use of the furnace

Furnace exploitation with a natural stones veneer from another manufacturer, laying of the

Expiration of a warranty

2
3
4

Independent repair or changes in the engineering design of the furnace

Installation of burner units unauthorized by manufacturer

5
6

Installation of gas equipment in the furnace, which is not designed for gas. Product certiﬁcate

should contain information that the furnace could be used with gas equipment (page 33)

Addition of di erent kinds of salts and salt-containing solutions without the use of a special

device - evaporator

In case if a failure occurs, customer has the right to turn to an authorized distributor who

sold the furnace or directly to the manufacturer.

When applying to distributor or manufacturer, provide installation and operation manual

with ﬁlled-in product certiﬁcate. If you have any questions, please contact us by calling the toll-free

number 8(800)555-56-16 or by using an e-mail: [email protected].

Содержание ANAPA





































Результаты поиска

Содержание ANAPA

Отзывы:

Похожие инструкции для ANAPA

Бренды по названию

Популярные бренды

EASYSTEAM ANAPA, Руководство по установке и обслуживанию

Результаты поиска

Содержание ANAPA

Отзывы:

Похожие инструкции для ANAPA

Бренды по названию

Популярные бренды