EasyPro Eco-Clear EC2600 Скачать руководство пользователя страница 3

Страница: 3 / 12

8. Secure the prepared barb fittings to the filter inlet

(arrow pointing in) and outlet (arrow pointing out).

Be sure to use the gasket as shown and hand tighten

nut onto filter. Do not overtighten.
9. Connect the tubing from the pump to the barbed

fitting or 1 1/2" PVC adaptor on the inlet of the filter

and secure with a clamp.

10. Connect the tubing for the waterfall to barbed fitting

or 1 1/2" PVC adaptor fitting on the outlet of the filter

and secure with a clamp.

11. Run the tubing to the waterfall and attach to a

waterfall device if applicable. Burying the tubing will

produce the most natural look for your pond.

12. If the pressure filter unit is equipped with a UV

light make sure it is properly plugged into a GFCI

protected outlet. DO NOT operate the UV light until

the pump is running.

13. For units with UV, there is a connection at the ballast

to be made. Connect the 2-pin fittings by aligning

the ends properly and firmly pushing them together.

Secure by hand tightening the nut to create a

weatherproof seal. This connection is not meant to

be submersed but is good for outdoor use.

14. Confirm the backwash valve is in the “

RUN

” position

and plug in the pump and UV. To switch on the UV

remove the clear top and once activated secure clear

top back on filter with thumbscrew. Observe the filter

and connections for any leaks.

15. Conceal your pressure filter and tubing with your

choice of landscaping. Fake rocks are a good option

to hide the filter.

Operation Tips

Running the filtration system continuously is the best way to keep your pond looking

its best. Once installed the filter will take a few weeks to build up sufficient nitrifying

bacteria in the system.
To maximize the filter’s performance and avoid ineffectiveness or damage to the filter,

be sure to match the flow rate with the filter’s specifications.
These filters are not to be used in the winter during freezing conditions. Be sure to

disconnect and drain the filter to store in a warmer location for the winter.

Steps 8, 9, 10

Step 13

OUTLET

INLET

Step 14

Содержание Eco-Clear EC2600













Результаты поиска

Содержание Eco-Clear EC2600

Отзывы:

Похожие инструкции для Eco-Clear EC2600

Бренды по названию

Популярные бренды

EasyPro Eco-Clear EC2600, Инструкции по эксплуатации, безопасности и гарантии

Результаты поиска

Содержание Eco-Clear EC2600

Отзывы:

Похожие инструкции для Eco-Clear EC2600

Бренды по названию

Популярные бренды