2. Installation and Configuration
• Rear View
NO
Function
1
Power Adaptor
Terminal
2
Power
Indicator(Green)
Status
Indicator(Red)
3
Audio Input
Audio Output
4
Network
Connector
(PoE)
5
Video Output
6
Micro SD Card
Slot
7
3pin Terminal IO
2pin RS485
Terminal
8
Service Monitor
Port
9
Reset Button
Note: Video Output is only used for
adjustment from one’s service monitor when configuring the
2. Installation and Configuration
Description
daptor
Connects the supplied power adapter or an
external power supply 12V DC or 24V AC
max. 4.0Watt.
Indicator(Green)
Indicates power input.
Indicator(Red)
Indicates camera status.
Audio Input Stereo Jack
Audio Output Stereo Jack
RJ-45 port compatible with 10/100Mbps,
which have a PoE function.
Connects the video output. This BNC
connector provides a 1.0Vp-p/75 ohms
composite video signal.
Micro SD Card
Card Slot for Micro SD. Open the protection
cover with a supported tool to insert Micro
SD card.
3pin Terminal IO
Connects alarm In/Out. **Disabled**
Connects PT device. **Disabled**
Service Monitor
Connects to controller for setting ID and IP
address if needed.
Executes the factory default.
used for service purposes. To provide easy zoom and focus
s service monitor when configuring the auto iris lens.
9
Connects the supplied power adapter or an
or 24V AC,
45 port compatible with 10/100Mbps,
Connects the video output. This BNC
p/75 ohms
Open the protection
cover with a supported tool to insert Micro
**Disabled**
**Disabled**
Connects to controller for setting ID and IP
easy zoom and focus
auto iris lens.
