22
Running A Control Solution Test
You need the meter, a test strip, and control solution.
1.
Put a test strip
into the meter in
the direction of
the arrow.
3.
Place the meter on a flat
surface, like a table.
4
.
Remove the control
solution bottle cap and
wipe the tip of the bottle
with a tissue.
5.
Squeeze the bottle until a
tiny drop forms at the tip of
the bottle and place
solution on top of bottle
cap.
Setting the meter in control solution mode will prevent the control solution
reading from being added to your memory and averages.
2.
The meter turns on.
Press M button or C button to select CS,
press power button to confirm the control
solution mode.
( means control solution mode,
means before meal mode and means
after meal.)
