OPERATIONAL
SAFETY
!
06
for your comfort
GENERAL SAFETY
Make sure that components such as the joystick, battery charger and other electronic components are not exposed to
excessive moisture. If any components come into contact with moisture, dry them before use.
The EasyFold PRO Seat is designed for comfort, not specifically for pressure relief; if you have any problems, please consult a
physician.
Adjust the EasyFold PRO Wheelchair to your personal comfort level as much as
possible.
Take time to learn how the EasyFold PRO works in a private space before using
it outdoors.
Practice bending, reaching and transferring in and out of the EasyFold PRO.
Always be aware of your surroundings when working.
If you are unsure if the EasyFold PRO can clear an obstacle, find another path.
The EasyFold PRO is designed for one user only; more than one user may result
in injury.
It is important to maintain the
EasyFold PRO. Lack of
maintenance can increase the
risk of injury.
Before sitting down, make sure
the EasyFold PRO is turned off.
This will ensure that the EasyFold
PRO
EasyFold PRO will not move when
transferring on and off the unit.
Make sure the footrest is down.
Make sure the feet are resting on
the footrest.
Check for unusual noises,
vibrations, or changes in usability.
If a problem is detected, use the
tool kit to perform maintenance
or contact us directly by phone or
e-mail.
before driving
PRE-OPERATION
Stay alert and aware of motorized vehicles
on the road or in parking lots.
At night, or when it is difficult to see, it is
suggested to use a reflective tape on the
chair.
EasyFold PRO is designed to be used on
firm, even surfaces such as concrete,
asphalt or indoor floors.
Do not use EasyFold PRO on sand or loose
soil.
while driving
OPERATION
Make sure the EasyFold PRO comes to a
complete stop before exiting.
Turn off the unit to prevent the wheelchair
from moving during the transfer.
Carefully raise the armrest and transfer
from the seat.
after driving