CODE
LEGEND
RED LIGHT #1 IS FLASHING:
INDICATES THAT THE BATTERY PRESSURE IS NOT FULL.
THE RED LIGHT N°2 IS BLINKING :
INDICATES NO JOYSTICK SIGNAL.
THE RED LIGHT N°3 IS BLINKING :
INDICATES THAT THE WHEELCHAIR IS CHARGING.
THE RED LIGHT N°4 IS BLINKING :
INDICATES JOYSTICK MOVEMENT WHEN POWER IS APPLIED.
OR DO NOT CONNECT THE MOTOR WIRES.
RED LIGHT #5 :
INDICATES THAT THE BRAKE SOLENOID IS NOT CONNECTED
OR IS DAMAGED.
18
DIAGNOSTICS
Your controller has an indicator light that, during normal operation, is solid
green. This light also functions as a diagnostic tool by flashing in patterns
that indicate problems. It is important to pay attention to these diagnostics
in case the power wheelchair should be taken out of service for safety
reasons until maintenance can be performed.
If the indicator light indicates a fault, turn the power off and back on. If the
fault is not cleared after the power is turned back on, the indicator repeats
this error message. Please refer to the diagnostic table of fault information
to help you find possible problems and corresponding solutions.
