Troubleshooting
20
Troubleshooting
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table. If it is still not possible to resolve the
problem, contact customer service. Do not repair the product yourself.
Problem
Possible reason and solution
The product
does not
operate.
• Check and ensure that the product is properly connected to
the mains socket, the mains socket is not defective and power
is switched on at the mains socket.
• Make sure the main power switch
3
is set to the ON (
I
)
position.
• The product is overheated (see chapter “Overheat protection”).
The product
is not heating
properly.
• Make sure the product is set to the desired room temperature.
• Make sure the product is clean and no dust is accumulated at
the vents
9
.
Cleaning
WARNING!
Burn hazard!
The product will get hot during operation and may cause burns.
− Let the product cool off completely before each cleaning.
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Make sure that no water penetrates the housing.
− Never immerse the product in water.