Installation
15
2. Line up the upper bracket
11
with the desired installation location and mark the
positions of the four screw holes found on the upper bracket on the wall.
The upper bracket must be installed horizontally and the mains cord
6
routed
to the bottom right of the product.
3. With the help of an electric drill, drill four holes into the wall at the marked locations
and then insert four wall plugs
16
into the drilled holes (see step 1 in
Fig. B
).
4. Install the upper bracket on the wall by aligning the holes found on the upper
bracket with the drilled holes. Then drive four screws A
17
through the holes
found on the upper bracket and into the wall plugs with the help of a crosshead
screwdriver (see step 2 in
Fig. B
).
5. Attach the lower bracket
12
to the screw holes
7
found at the bottom of the
main unit
1
with two screws D
20
(see
Fig. C
).
6. Attach the main unit to the wall by placing the holder
8
(found on the back of
the main unit) onto the upper bracket.
7. Mark on the wall the positions of the two screw holes found on the lower bracket
and then temporarily remove the main unit from the upper bracket.
8. Drill two holes in the wall at the marked locations and then insert two wall plugs
into the drilled holes.
9. Place the main unit back onto the upper bracket.
10. Attach the lower bracket to the wall by aligning the holes found on the lower
bracket with the drilled holes. Then drive two screws A through the holes found
on the lower bracket and into the wall plugs.
Placing the product on the floor
The supporting stand and base must be assembled before placing the product on
the floor.
1. Place the main unit
1
horizontally.
2. Attach the stand
13
to the bottom of the product with four screws C
19
(see
Fig. D
).
3. Attach the base
14
to the stand with four screw B
18
(see
Fig. E
).
4. Place the product on the floor in an upright position.
Make sure the floor is easily accessible, level, dry, heat-resistant and sufficiently
stable.
Ensure there is at least 1.5 m of free space around the product. Keep textiles,
curtains or any other flammable material away from the product.
Use the handles
10
when you need to move the product around.
