![background image](http://html1.mh-extra.com/html/easyathome/ef-11d/ef-11d_user-manual_3577264016.webp)
Operation
16
Inserting and changing the battery
The remote control
15
requires one CR2025, 3 V button cell battery (provided).
1. Turn the remote control over.
2. Pull the battery tray
35
out from the remote control while pushing the tab of the
battery tray to the right (see step 1 in
Fig. H
).
3. Insert a battery into the battery tray. Make sure the polarity is correct (“+” side is
facing up) (see step 2 in
Fig. H
).
If you are replacing the battery, take the old battery out of the battery tray before
inserting the new one. Dispose of the old battery in accordance with applicable
regulations (see chapter “Disposal”).
4. Slide the battery tray back into the remote control so that it locks into place (see
step 2 in
Fig. H
).
If the remote control is not responsive or not working, the battery
power may be low or empty. Replace the battery.
Connecting the product to mains supply
− Fully unwind the mains cord
6
and connect it to a mains socket.
Operation
• Before operation, make sure the product is properly mounted on
the wall or placed on the floor, and the mains cord
6
is properly
connected to the mains socket (see chapter “Installation”).
• Point the remote control
15
directly toward the front side of the
main unit
1
and make sure there are no obstructions between
the product and the remote control.
• The product may emit a faint smell when it is first heating up.
This is entirely safe and harmless. Make sure there is adequate
ventilation in the room.
• Make sure the vents
9
are not covered during operation.
• The product emits a beep sound when a button is pressed.
• Once illuminated, the display
4
turns off automatically after
about 30 seconds. To activate the display again for operation,
press any button on the main unit or remote control, then
continue to press the desired buttons to control the product.