![background image](http://html1.mh-extra.com/html/easyathome/99135/99135_user-manual_3597013016.webp)
Using the product
16
Long crevice nozzle
The long crevice nozzle
16
is suitable for cleaning all kinds of narrow, hard-to-reach
areas (e.g. crevices in furniture, and radiator fins).
Using the product
NOTICE!
Risk of damage!
Improper handling of the product can damage the product.
− The suction opening must be unobstructed at all times.
Obstruction in the opening may cause the motor to overheat
and become damaged.
− If the floor nozzle is blocked and the brush roll can no longer
rotate, the product will switch off automatically. The LEDs will
start flashing alternately. If this happens, remove the blockage
as described in chapter “Cleaning the brush roll”. Then press
the On/Off switch once before you start using the product
again.
Before each use (especially prior to first use), ensure that the HEPA
filter
3
and filter holder
4
have been properly positioned in the
dust container. If necessary, push the filter holder slightly into the dust
container.
1. Disconnect the power adapter
21
from the product and remove the handheld
section
11
from the wall bracket
19
.
2. Attach any required accessories (see chapter “Attaching accessories”).
3. Switch the product on by pushing the On/Off switch
9
. The battery status
indicator
10
will light up. The symbol “max” will light up when ECO mode is
deactivated (see
Fig. F
).
ECO mode
This product is equipped with ECO mode, which makes it consume less energy and
run quieter. You can also activate this mode while the product is in operation.
− To activate ECO mode, press the ECO button
1
.
The “eco” symbol will light up (see
Fig. F
).
− Press the ECO button once more to deactivate ECO mode.
The “eco” symbol will go out.
Содержание 99135
Страница 4: ...4 Package contents B D C E 19...
Страница 5: ...5 Package contents F H I G PUSH MOVE 7 8 27 26...