Storage
19
Reinstalling the brush roll
1. Slide the release latch
26
all the way outwards.
2. Place one end of the brush roll
27
onto the drive shaft located on the side
opposite to the release latch. Only one side of the brush roll will fit on the drive
shaft.
3. Insert the other end of the brush roll into the corresponding notch under the
release latch.
4. Let go of the release latch.
5. Before you use the floor nozzle, ensure that the brush roll has been properly
installed.
Cleaning the housing and accessories
− Wipe down the housing and accessories using a slightly damp cloth. To remove
stubborn dirt, add some mild detergent to the cloth.
Storage
All parts must be completely dry before being stored.
− Always store the product in a dry location.
− Protect the product from direct sunlight.
− Store the product out of reach of children, securely locked away and at a storage
temperature of between 5 °C and 20 °C (room temperature).
Technical data
Product
Model:
99135
Product code:
99135
Noise emission:
< 80 dB at 1.5 m
Weight:
2,190 g
Dimensions (W × H × D):
240 × 260 × 1,175 mm
Input voltage/current:
100–240 V~, 50/60 Hz, max. 0.8 A
Содержание 99135
Страница 4: ...4 Package contents B D C E 19...
Страница 5: ...5 Package contents F H I G PUSH MOVE 7 8 27 26...
