SERVICIO POSVENTA
Encendido, apagado y selección de nivel
USA
32
USA
1 866 558 8096
Cepillo voluminizador de aire caliente
Limpieza básica
1. Retire el material de embalaje y todo el envoltorio de plástico.
2. Limpie todas las piezas del cepillo antes del primer uso, como se describe en
el capítulo “Limpieza”.
Encendido, apagado y selección de nivel
− Si la temperatura es demasiado alta por una entrada o salida de
aire bloqueada, el cepillo se apagará automáticamente.
Debe esperar a que el cepillo se enfríe antes de encenderlo de
nuevo.
− Asegúrese de que el accesorio de cepillo esté bien montado
antes de encender el cepillo.
− Para optimizar los resultados, lávese el pelo con champú y
acondicionador antes de usar el cepillo.
− Con el cepillo encendido, la luz indicadora IONIC
5
estará
iluminada.
1. Conecte el enchufe ALCI
6
a una toma de corriente de pared.
2. Deslice el interruptor de nivel
4
a la posición que desee.
• Deslícelo a la posición “2” para un flujo elevado de aire con calor.
• Deslícelo a la posición “1” para un flujo reducido de aire con calor.
• Deslícelo a la posición “0” para apagar el cepillo.
Uso del accesorio de cepillo
El cepillo viene con un cepillo redondo grande, uno pequeño y uno plano.
El accesorio de cepillo se puede calentar mucho durante el uso.
Toque únicamente el mango
9
durante el funcionamiento.
Montaje del accesorio de cepillo
1. Inserte el cepillo deseado (
1
/
10
/
11
) en la parte superior del mango
9
(véase el paso 1 en la
fig. B). Asegúrese de que las ranuras del cepillo
coincidan con las lengüetas del mango.
2. Gire ligeramente el cepillo a la izquierda hasta que lo escuche encajar
(véase el paso 2 en la
fig. B).
Así habrá montado bien el cepillo.
For
review
R2