background image

800-428-8560 

midwesthomes4pets.com 

3142 S. Cowan Rd.  

Muncie, Indiana 47302

 

Warning: Remove collars, tags, and leads from pet before placing it in the kennel to prevent possible 
entanglement.

 DO NOT leave young animals unsupervised for extended periods of time. MidWest’s main concern is 

your pet’s well-being. If your pet has never been kept in any enclosure, specific training may be necessary for your pet’s 
safety. A pet, not specifically trained to be restricted, may attempt to escape from this enclosure, which could cause        
serious injury to your pet or damage to this product. MidWest will not accept liability or warrant any loss to improper use 
of this product by a pet that has not been properly trained. 

IMPORTANT INFORMATION

Assembly Instructions for Model Number K910106

1.

Assembly Videos and Instruction Manuals can be viewed at midwesthomes4pets.com.

Helpful Hints 

Please take time to read and follow these instructions. To make set-up easier, locate a level area to assemble your 
kennel. Remove all components from the carton and arrange them as shown on Page 2. You will need a pair of pliers 
and an adjustable wrench to assemble your kennel. We recommend two people assemble the kennel together.

 

 

The chain-link fence comes in one continuous 40’ piece. It is prone to tangle while attaching, but with two people and 
a little patience, the fence can applied with minimal complication. The best practice is to unroll the fence and stretch 
it out completely to undo any tangling. Then, using two people, lift, pull, and stretch the chain-link fence around the 
perimeter one small section at a time. 

Sunscreen Safety 

Your K9 Kennel comes with a Sunscreen. We suggest removing and storing the Sunscreen when not needed to shade your 
pet. Do not allow snow or debris to collect on top of the Sunscreen. Occasionally, even rain will collect.  Remove it as soon 
as possible. Injury to your pet and damage to your Kennel may occur if the load is not removed. Properly cared for, your 
Sunscreen will provide years of service and protection for your pet.

For instructions in        Spanish and French, please visit www.midwesthomes4pets.com.

Warranty Information 

Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of           
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please 
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you discover 
any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. 
EST) or at [email protected].

Summary of Contents for K9 Kennel K910106













Reviews: