www.easy2access.net
Easy2Access A/S
®
EASY-908 Pin Code lock
27
please contact
Easy2Access A/S
in Denmark at
0045-70237032
.
10.
Maintaining the Lock
The outside body of the lock should at least once annually be polished with
WD40. WD40 ensures the lock is cleaned for dirt and is protecting for
corrosion. If the lock is exposed to sea fog or salt in other ways, it is
recommended to polish after each exposure. The lock will corrode if exposed
to salt and not protected with grease.
11.
Locking the door on a multi-point mortise lock
Locking when the inside handle is in UNLOCK position
Enter the POWER button
from the inside keypad. In 3 seconds after the
POWER button is pushed, the outside handle will get into unlock position and
will stay that for another 5 seconds. You have to lift up the outside handle to
lock the three point mortise before the timer expires. After the timer expires,
the inside handle and outside handle will get back to lock position
simultaneously.
Locking when the inside handle is in LOCK position
A.
If you want to lock the three point mortise after going outside,
enter the inside PIN code + #
+ the POWER button
to put the
inside handle in Unlock position for you to go outside. In 3 seconds
after the POWER button is pushed, the outside handle will get into
unlock position and will stay in that position for another 5 seconds. You
have to lift up the outside handle to lock the three point mortise before
the timer expires. After the timer expires, the inside handle and
outside handle will get back to lock position simultaneously, and then
the Red LED on the lock will blink once and one beep will be heard.
B.
If you don’t want to lock the three point mortise after going
outside,
enter the existing inside PIN code + #
,
and don’t need
to touch any other button
, just turn down the inside handle to unlock
in 10 seconds. After the timer expires, the inside handle will get back to
