JACKAL LANTERN
JACKAL LANTERN
MODEL: 680291 / SB1201
MODEL: 680291 / SB1201
INSTRUCTIONS FOR USE
INSTRUCTIONS FOR USE
Light modes
- Press the button to alternate the functions: (100% -> 50% -> 20% -> OFF)
LM
Lighting time (full charge)
100% mode
100
4h
50% mode
50
7h
20% mode
20
14h
Use of the lamp:
• Lamp is charged using 5V DC USB power outlet. Charging cable is
integrated in the hanger
• Lamp have built in overcharge protection circuit
• Open hanger to attach lamp to suitable hanging point
• Lamp is waterproof to IPx7
• Lamp can be cleaned with water or a damp rag
• Do not use corrosive liquids to clean the lamp
• Do not stare into the light source
Light source: 3 x 0.5W LED
Light source and control gear is not replaceable. This would introduce weak points in the construction, that could reduce
the lifetime of the product.
Instruction for removal of light source and control gear by market surveillance authorities:
1. Remove lamp shade by hand
2. Remove 4 pcs plugs covering the screw holes using a pick
3. Unscrew 4 pcs screws and take apart the lamp
4. Unscrew screws holding PCB in place
5. Cut needed wires to remove the required components for testing
Instruction for disassembly of lamp for disposal of components when lamp have reached the end of its usable life:
- See step 1-4 above
6. Cut wires to allow removal of battery. Dispose of battery according to local regulations
7. Cut wires to allow removal of electronics on circuit board. Dispose of electronics according to local regulations
8. Dispose of remaining components according to local regulations
Technical data:
3.7V , 3x0.5W
Input: 5V , 180mA
Battery: 3.7V , 1000mAh Li-Po
Class 3 appliance
Hanger
Light
Lampshade
Power Switch
Input USB Cable
