4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
DUTY CYCLE
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. It is easiest to look at your welding time in blocks of 10 Minutes
and the Duty Cycle being a percentage of that 10 Minutes. If welding at 65 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for
6 Minutes with 4 Minutes of cooling for the Welder.
If the Duty Cycle is exceeded, and the built-in Breaker is tripped, allow the unit to cool for a minimum of 15 minutes. When a safe temperature has been reached,
the Welder can be switched back on. To increase the duty cycle, turn down the Voltage Output control. Going above 65 Amps will yield a lower Duty Cycle.
SPECIFICATIONS
Solid
Stainless
Flux Core
Wire Type and Diameter
0.023”-0.030”
[0.6mm-0.8mm]
0.023”-0.030”
[0.6mm-0.8mm]
0.030”
[0.8mm]
MIG WELDING WIRE CAPACITY
Power Voltage (V)
1 phase, 120 VAC, 50/60 Hz
Maximum Output No Load Voltage (V)
56V DC
Rated Input Current (Amps)
24
Output Current Range (Amps)
30 to 90 Amps
Duty Cycle (%)
25% @ 90 Amps 60% @ 65 Amps 100% @ 50 Amps
Wire Feed Speed (inch/minute)
80 - 278 IPM
Maximum Material Thickness
1/8”
Weight
14.52 lbs. [6.58kg]
Dimensions
10.75” x 5.50” x 10.75” [274mm x 140mm x 272mm]
