10
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
PROBLEM
CAUSE
CORRECTION
Does Not Run
When Switch
is On
Battery out
of charge
Charge the battery
Battery
damaged
Contact Eastwood Technical Assistance:
[email protected] or 800.544.5118.
Motor Stops
During Use
Battery out
of charge
Charge the battery
Battery
damaged
Contact Eastwood Technical Assistance:
[email protected] or 800.544.5118.
Excessive
Noise and/or
Vibration
Diamond
Grinding Wheel
is damaged
WARNING!
This is an extremely dangerous condition!
Stop Use and replace Diamond Grinding
Wheel!
Motor Runs
but Wheel
Does not Spin
Wheel is Loose.
Check Phillips Head Screw and ensure Wheel
is tight
Collet is Loose
Remove Tungsten Grinding Guide, Wheel, and
Arbor Guide. Using Provided Collet Wrench, ensure
Collet is tight.
Tungsten
Grinder
Overheats
Excessive
pressure being
applied to
tungsten
Allow Diamond Grinding Wheel to cut by rotation
alone.
DO NOT
Force.
Dirt and debris
buildup in
motor cooling
air slots
Use a brush or compressed air to remove debris.
TROUBLESHOOTING
