background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

 

 READ INSTRUCTIONS 

•  Thoroughly read and understand this manual before using. 
•  Save for future reference.

 

PINCH HAZARD!

•  This tool has hydraulically actuated components that generate greatly amplified crushing and bending forces which can quickly cause 

severe injury! Keep fingers and hands away from moving parts when operating.

 

INJURY HAZARD!

•  While in use, objects under pressure in the Eastwood 12 Ton Floor Shop Press can suddenly slip out of position, releasing a great deal of 

stored energy and force causing serious injury or death and property damage. Work from the Pump side of the Frame at all times.  
Do not allow others near the tool while in operation.

 

INJURY HAZARD!

•  The Eastwood 12 Ton Floor Shop Press was specifically designed to be operated by one person only. Never have one person operate the 

 lever while one handles the Ram or Spreader, or serious injury could occur.

•  Injury or property damage could occur from being struck by ejected workpiece fragments. Before beginning work, be sure the  

surrounding work area is clear of persons or objects to avoid injury or property damage.

•  Excessive resistance while operating could indicate excessive side loads or component binding. To avoid injury and or severe tool  

damage, stop work immediately and inspect tool components and extensions for any deflection or bending.

•  The Eastwood 12 Ton Floor Shop Press consists of heavy metal components which can cause serious injuries if allowed to drop.  

Avoid pinching hands while handling parts during assembly. 

•  Obtaining the assistance of a helper during assembly is recommended.

 

•  The Eastwood 12 Ton Floor  Shop Press is intended for use as a linear pushing and compression tool.  

DO NOT

 use as a jack, lifting, or support device.

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:

Содержание 54441









Отзывы: