Eastwood 32559, Инструкция по эксплуатации

Страница: 7 / 8

To order parts and supplies: 800.343.9353 >> eastwood.com
7
PROBLEM CAUSE CORRECTION
Upper Die
Stops At
Lower Die
Metal work-
piece too thick
or too hard
Stop all action to avoid serious damage.
Do not exceed material limitations described
in the “SPECIFICATIONS” section.
Metal slug
particles in Die
Stop all action to avoid serious damage.
Remove slug from Dies.
Upper Die
Binding at
Release With
Lower Die
Metal work-
piece too thick
or too hard
Stop all action to avoid serious damage.
Do not exceed material limitations described
in the “SPECIFICATIONS” section.
Metal chips
or particles
in Dies
Stop all action to avoid serious damage.
Remove chips or particles from Dies.
Dies Will Not
Shear Metal
Dies worn
or damaged
Follow Die Replacement instructions.
Metal work-
piece too thick
or too hard
Stop all action to avoid serious damage.
Do not exceed material limitations described
in the “SPECIFICATIONS” section.
TROUBLESHOOTING