2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
EASTWOOD 14 GAUGE METAL HAND PUNCH
is designed to rapidly produce repeatable, clean,
accurate holes in mild steel up to 14 Gauge (5/64”) [2mm] thick making it perfect for creating rivet
holes for custom fabrication work. A compound-leverage design greatly amplifies hand pressure
providing greater accuracy, speed and convenience. The 16 Piece, Eastwood Metal Hand Punch is
supplied with 7 Male and Female Die Sets and Die Installation Tool.
CONTENTS
(1)
Metal Hand Punch
with Depth Stop Gauge
(1)
Die Installation Key
(1)
Complete Set of 7 Male and
Female Punch Dies:
- 3/32” [2.38mm]
- 1/8” [3.18mm]
- 5/32” [3.97mm]
- 3/16” [4.76mm]
- 7/32” [5.56mm]
- 1/4” [6.35mm]
- 9/32” [7.14mm]
SPECIFICATIONS
• Maximum material punching thickness:
- 16 Gauge stainless and high-carbon steels
- 14 Gauge mild steel
- 12 Gauge aluminum
• 1.75” [44mm] Throat Depth allows punching into the center of a 3.5” [88mm] work piece.
• Compound Leverage Action greatly amplifies punching power.
Exceeding rated material limitations can result in severe personal injury
and/or damage to the unit.
The Upper Male Die must be installed first followed by the Lower Female Die.
