To order parts and supplies: 800.343.9353 >> eastwood.com
11
PROBLEM
CAUSE
CORRECTION
Tool Doesn’t
Respond to
Trigger
Depression
Insufficient volume
of air (CFM) to
operate tool
Verify sufficient air supply to tool. (3.6 CFM @
90 psi minimum requirement.
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Tool Perfor-
mance is Slow
or Sluggish
Insufficient volume
of air (CFM) to
operate tool
Verify sufficient air supply to tool. (3.6 CFM @
90 psi minimum requirement.
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Air Motor is lack-
ing lubrication
Stop use immediately and add air tool oil
directly to air inlet.
Tool Vibrates
Excessively
During Use
Out of balance
condition from
damaged Cutting
Wheel
Stop use immediately, check for and replace
cracked or broken Cutting Wheel.
Loose Locking
Screw
Tighten loose Locking Socket Head Cap Screw.
TROUBLESHOOTING
