Eastwood 31847, Инструкция по эксплуатации

Страница: 5 / 12

To order parts and supplies: 800.343.9353 >> eastwood.com
5
INSTALL/REPLACE
CUT-OFF WHEEL
• Place the 17mm Flat Wrench on the large
Flange Nut (FIG 1) .
• Using the included 4mm Hex Key, loosen
the Socket Head Lock Screw, turn it
CLOCKWISE and remove it
(FIG 1) .
• Place the included 11mm Flat Wrench on
the flats of the Arbor
(FIG 2)
.
• Using the included 17mm to loosen
and remove the Flange Nut, leaving the
Washer in place
(FIG 3)
.
• Install Wheel over protruding 3/8” Arbor
and Washer (FIG 4) .
• Replace Flange Nut over Wheel and
tighten with 17mm Flat Wrench.
• While holding the 17mm Flat Wrench on
the Flange Nut, thread in the REVERSE
THREADED Socket Head Lock Screw and
snugly tighten (Do Not Over-Tighten).
This screw is REVERSE
THREADED. Use caution
not to strip or break this
screw when removing
or installing (Fig 2).
FIG. 1
FIG. 2
FIG. 3
FIG. 4